Projects
Industrial RO project in Dinajpur: interpreting a 1500 GPD / 250 LPH system brief
A project-focused explanation of the supplied Dinajpur industrial RO installation image and the design questions behind this type of system.
Read guide →Waterwise knowledge centre
Practical water-treatment knowledge, built for real decisions
Browse 196 guides covering RO, WTP, STP, ETP, softening, DM/EDI, water testing, filtration, equipment and maintenance.
Featured engineering reads
View full library ↓Start with the topics people ask about most
Projects
Automatic RO project in Narayanganj: lessons from a 2 m³/hr plant
A project-focused article based on the supplied Waterwise artwork showing an automatic 2 m³/hr RO plant in Narayanganj.
Read guide →
Projects
Stainless-steel DM and EDI project in Monohordi: 750 LPH system notes
A project-focused article based on supplied Waterwise artwork for a stainless-steel industrial water-treatment plant with DM and EDI.
Read guide →
Projects
Industrial WTP 20 m³/hr: project planning lessons from a large-flow plant
A project-focused article based on supplied Waterwise artwork showing a 20 m³/hr industrial water treatment plant.
Read guide →AllROWTP & filtrationWastewaterHigh-puritySofteningTesting & qualityMaintenanceEquipmentCommercialBuyer's guideProjects
WTPSurface-water WTP treatment train: why clarification often matters
How turbidity, seasonal variation and microbial risk influence surface-water treatment plant design.
Read article→WTPGroundwater WTP treatment train: iron, hardness and dissolved minerals
How groundwater treatment differs from surface-water treatment and why testing should guide each stage.
Read article→
Commercial WaterCommercial water treatment for offices: drinking water and utility planning
A practical framework for office water-treatment systems, from drinking-water demand to storage and maintenance.
Read article→Commercial WaterCentral water treatment for hotels: source, storage and multiple uses
How hotels can plan a central treatment system for guest rooms, kitchens, laundry and utility water without over-treating every stream.
Read article→
Commercial RORestaurant RO system sizing: drinking, cooking, ice and beverage demand
How restaurants can estimate RO demand and decide where treated water is actually required.
Read article→
Healthcare WaterHospital water treatment system: separate potable, utility and specialist needs
A planning framework for healthcare water systems without assuming one treatment quality is suitable for every hospital use.
Read article→Project InsightIndustrial RO project in Dinajpur: interpreting a 1500 GPD / 250 LPH system brief
A project-focused explanation of the supplied Dinajpur industrial RO installation image and the design questions behind this type of system.
Read article→Project InsightAutomatic RO project in Narayanganj: lessons from a 2 m³/hr plant
A project-focused article based on the supplied Waterwise artwork showing an automatic 2 m³/hr RO plant in Narayanganj.
Read article→Project InsightStainless-steel DM and EDI project in Monohordi: 750 LPH system notes
A project-focused article based on supplied Waterwise artwork for a stainless-steel industrial water-treatment plant with DM and EDI.
Read article→Project InsightIndustrial WTP 20 m³/hr: project planning lessons from a large-flow plant
A project-focused article based on supplied Waterwise artwork showing a 20 m³/hr industrial water treatment plant.
Read article→
Project InsightSTP project operation notes: from treatment vessels to daily maintenance
A practical interpretation of the supplied Waterwise STP project image and the operating considerations behind sewage treatment.
Read article→
Maintenance & ServiceDecommissioning a Water Treatment Plant: What It Involves
Eventually every treatment plant reaches the end of its working life or is replaced by a new system, and decommissioning it properly involves more than simply disconnecting and removing equipment. Here is a general orientation.
Read article→Water Treatment TechnologyHow Much Automation Does Your Water Treatment Plant Actually Need?
Automation is often marketed as an unambiguous upgrade, but the appropriate automation level for a given plant depends on genuine trade-offs specific to the facility. Here is how to think through that decision.
Read article→
Maintenance & ServiceLockout-Tagout and Safety Signage for Water Treatment Plants
Lockout-tagout procedures and clear safety signage protect maintenance staff from equipment that could unexpectedly start or release stored energy during servicing. Here is a general orientation for treatment plant settings.
Read article→
Water Treatment TechnologySeawater RO vs Brackish Water RO: Key Design Differences
Seawater and brackish water RO are sometimes discussed as though they were the same technology applied to different salinity levels, but the difference in salinity drives genuinely distinct design requirements. Here is how they differ.
Read article→Commercial Water TreatmentWater Treatment Planning for University and College Campuses in Bangladesh
University campuses combine several distinct water-use contexts within a single institution — academic buildings, residential halls, dining facilities, and laboratories — each with different requirements. Here is a general orientation.
Read article→
Bangladesh Water IssuesSeasonal TDS Variation in Bangladesh Groundwater: What Causes It
Groundwater quality in Bangladesh is not necessarily constant throughout the year, and TDS in particular can show meaningful seasonal variation in some areas. Here is a general orientation to why.
Read article→
Maintenance & ServiceCorrosion Prevention in Water Treatment Plants: Materials and Practices
Corrosion is a slow, cumulative threat to treatment plant equipment and piping that is often addressed reactively rather than through deliberate prevention. Here is a general orientation to reducing this risk.
Read article→
Industrial Water TreatmentPurified Water vs Water for Injection: A Pharmaceutical Water Primer
Pharmaceutical manufacturing distinguishes between several defined water grades, each with its own pharmacopeial specification and appropriate use. Here is a general orientation to two of the most commonly referenced grades.
Read article→
RO & FiltrationCan RO Reject Water Be Reused? A Practical Look
RO systems reject a meaningful portion of feed water as concentrate, and reusing rather than simply discharging it is an appealing idea. Here is an honest look at where this genuinely makes sense and where it does not.
Read article→Maintenance & ServiceStandard Operating Procedures for Water Treatment Plants: Why They're Worth Writing
Written standard operating procedures are sometimes seen as bureaucratic overhead, but for a water treatment plant they are a genuine, practical safeguard against inconsistent operation and lost institutional knowledge.
Read article→
RO & FiltrationFilter Housing Material Selection: Plastic vs Stainless Steel
Cartridge filter housings are available in several materials with different pressure ratings, chemical compatibility, and cost. Here is how to think about choosing between them for a specific application.
Read article→Industrial Water TreatmentWater Treatment for Frozen Food Processing Facilities in Bangladesh
Frozen food processing, an increasingly significant segment of Bangladesh's food export sector, combines direct product-contact water use with heavy reliance on ice and refrigeration. Here is a general orientation.
Read article→
Water Treatment TechnologySilica in Water: Why It's a Particular Challenge for RO and Boiler Systems
Silica behaves differently from most other scale-forming minerals and deserves specific attention in RO and boiler system design. Here is a general orientation to why it is treated as a special case.
Read article→Need help applying this information?
Request assessment