Projects & systems

Real project details where they are documented—no invented claims

Explore Waterwise Bangladesh project examples, installed systems and treatment equipment. Where the supplied project artwork identifies a client, location or capacity, those details are shown exactly; where it does not, the item is presented as a system example.

RO · WTP · DM/EDIProcess-water systems

STP · DisinfectionWastewater & hygiene

Softening · FiltrationPretreatment & utilities

Documented project portfolio

Systems, capacities and applications

Each card explains what is actually supported by the supplied project image and adds practical engineering context without creating unsupported customer outcomes or testimonial quotes.

Industrial RO installation for evaporator use

Documented project

Industrial RO + iron removal + multi-stage filtration1500 GPD / 250 LPH

Industrial RO installation for evaporator use

The supplied project artwork documents a 1500 GPD / 250 LPH industrial RO installation in Dinajpur for evaporator use. The treatment train is identified as industrial RO with iron removal and multi-stage filtration, showing the importance of preparing groundwater before the membrane stage.

ClientMinistry of Agriculture

Application / locationDinajpur, Bangladesh

SystemIndustrial RO + iron removal + multi-stage filtration

Iron-control pretreatment before RO
Multi-stage filtration for membrane protection
Automatic control and flow monitoring
Process-water production for evaporator use

Discuss a similar requirement →

Documented project

Automatic RO with pretreatment2 m³/hr

Automatic industrial RO plant

The project image identifies an automatic RO plant rated at 2 m³/hr in Narayanganj. The visible arrangement includes pretreatment vessels, a membrane skid, pumps, instrumentation and a control panel intended to support automatic operation.

ClientSummit Power Plant

Application / locationNarayanganj

SystemAutomatic RO with pretreatment

2 m³/hr stated plant capacity
Automatic operating sequence
Pretreatment before membrane filtration
Stainless-steel frame and process equipment

Discuss a similar requirement →

Stainless-steel industrial water treatment with DM and EDI

Documented project

RO + DM + EDI polishing750 LPH · approx. 4500 GPD RO system

Stainless-steel industrial water treatment with DM and EDI

This supplied project artwork identifies a stainless-steel industrial water-treatment plant with DM and EDI installed at Vitacane Industry, Monohordi. It states 750 LPH capacity and an approximately 4500 GPD RO system with a fully automatic control panel.

ClientVitacane Industry

Application / locationMonohordi

SystemRO + DM + EDI polishing

RO as bulk dissolved-solids reduction
DM/EDI polishing for higher-purity water
Stainless-steel treatment vessels
Automatic control and stage-by-stage monitoring

Discuss a similar requirement →

System example

Industrial water treatment plant20 m³/hr stated capacity

Industrial WTP plant

The supplied Waterwise artwork presents a 20 m³/hr industrial WTP with large treatment vessels and associated piping. The image does not identify a client or project location, so those details are intentionally not inferred.

Application / locationIndustrial / commercial application

SystemIndustrial water treatment plant

Large-flow hydraulic design
Media treatment and solids control
Backwash planning
Pump, piping and control coordination

Discuss a similar requirement →

System example

Biological sewage treatmentSite-specific

Sewage treatment plant (STP)

This Waterwise STP image shows treatment vessels, piping and an operating site. Because the supplied artwork does not state a client, location or capacity, the page treats it as a system example rather than inventing project details.

Application / locationBuilding / institution / commercial application

SystemBiological sewage treatment

Flow equalisation and biological treatment
Clarification and disinfection as required
Sludge handling and odour management
Routine operation, aeration and housekeeping

Discuss a similar requirement →

System example

Pretreatment + demineralization / polishingDesigned to requirement

Demineralization (DM) water plant

The supplied Waterwise DM plant image shows a multi-vessel treatment arrangement with a central control system. DM systems are planned around the raw-water ionic load and the product-water quality required by the downstream process.

Application / locationIndustrial process-water application

SystemPretreatment + demineralization / polishing

Raw-water analysis before process selection
Pretreatment to protect polishing stages
Conductivity monitoring
Regeneration and chemical-management planning

Discuss a similar requirement →

System example

Pretreatment + reverse osmosisDesigned to demand

Industrial RO plant

This industrial RO image shows pretreatment vessels, membrane equipment, storage and controls. A comparable plant should be sized from source-water analysis, product-water target, operating hours, recovery and storage rather than copied from another site.

Application / locationFactory / process application

SystemPretreatment + reverse osmosis

Feed-water chemistry and scaling risk
Pretreatment before membranes
Permeate, reject and recovery monitoring
CIP and maintenance access

Discuss a similar requirement →

System example

Ion-exchange softeningSized from hardness load and flow

Water softener plant

The water-softener image shows a multi-vessel system used for hardness control. Softener sizing is based on hardness concentration, flow, resin capacity and regeneration strategy; it is not a substitute for RO or disinfection when those processes are required.

Application / locationCommercial / industrial utility water

SystemIon-exchange softening

Hardness removal by ion exchange
Brine regeneration planning
Peak-flow and resin-capacity sizing
Treated-water hardness checks

Discuss a similar requirement →

Compact disinfection plant for mini-hospital use

System example

Semi-automatic / fully automatic disinfection system100–300 L/day stated requirement

Compact disinfection plant for mini-hospital use

The supplied product artwork describes a compact disinfection plant for mini-hospital use. It lists tap, deep-well or treated water as possible sources; 100–300 litres/day approximate demand; 1–3 bar inlet pressure; and semi-automatic or fully automatic operation.

Application / locationHealthcare water application

SystemSemi-automatic / fully automatic disinfection system

Disinfection after suitable upstream treatment
Compact footprint for small-demand applications
Controlled dosing / process operation
Verification through appropriate water-quality checks

Discuss a similar requirement →

FRP pressure vessels for filtration and softening

System example

Media filters / softeners / specialty media systemsMultiple vessel sizes

FRP pressure vessels for filtration and softening

The supplied Waterwise image presents a range of FRP pressure vessels. Vessel diameter, height, distributor arrangement, media depth, service flow and backwash demand should be matched to the treatment duty rather than selected only by external size.

Application / locationWater-treatment equipment

SystemMedia filters / softeners / specialty media systems

Media filtration and softening duties
Corrosion-resistant vessel construction
Service-flow and backwash sizing
Valve, distributor and maintenance access

Discuss a similar requirement →

How a real project is defined

Water test + demand + site conditions = treatment basis

Capacity alone does not define a treatment system. A responsible proposal connects the source-water analysis, required outlet quality, operating hours, storage, utilities, drainage, maintenance access and downstream use.

01AssessSource, test data, water problem and target quality

02DesignTreatment train, hydraulic duty, controls and storage

03InstallEquipment, piping, electrical and commissioning checks

04SupportOperating records, consumables and preventive maintenance

Planning a water-treatment project?

Send the water source, intended use, demand and any available test report.

Request assessment Water testing guidance