Projects
Industrial RO project in Dinajpur: interpreting a 1500 GPD / 250 LPH system brief
A project-focused explanation of the supplied Dinajpur industrial RO installation image and the design questions behind this type of system.
Read guide →Waterwise knowledge centre
Practical water-treatment knowledge, built for real decisions
Browse 196 guides covering RO, WTP, STP, ETP, softening, DM/EDI, water testing, filtration, equipment and maintenance.
Featured engineering reads
View full library ↓Start with the topics people ask about most
Projects
Automatic RO project in Narayanganj: lessons from a 2 m³/hr plant
A project-focused article based on the supplied Waterwise artwork showing an automatic 2 m³/hr RO plant in Narayanganj.
Read guide →
Projects
Stainless-steel DM and EDI project in Monohordi: 750 LPH system notes
A project-focused article based on supplied Waterwise artwork for a stainless-steel industrial water-treatment plant with DM and EDI.
Read guide →
Projects
Industrial WTP 20 m³/hr: project planning lessons from a large-flow plant
A project-focused article based on supplied Waterwise artwork showing a 20 m³/hr industrial water treatment plant.
Read guide →AllROWTP & filtrationWastewaterHigh-puritySofteningTesting & qualityMaintenanceEquipmentCommercialBuyer's guideProjects
Water Treatment TechnologyDissolved Oxygen: Why It Matters in Water and Wastewater Treatment
Dissolved oxygen is a parameter that matters differently depending on whether the context is drinking water, industrial process water, or biological wastewater treatment. Here is a general orientation.
Read article→
Industrial Water TreatmentWater Treatment Chemical Storage: Shelf Life and Degradation Considerations
Treatment chemicals do not remain effective indefinitely in storage, and using a degraded chemical can silently undermine treatment performance without any obvious warning sign. Here is a general orientation.
Read article→
Maintenance & ServiceRO Plant Startup and Shutdown Procedures: Why They Matter
How an RO plant is started up and shut down affects membrane life and system reliability just as much as day-to-day operation. Here is why these procedures deserve deliberate attention.
Read article→Water Treatment TechnologyWater Meters for Treatment Plants: Types and Accuracy Considerations
Accurate flow measurement underpins good treatment plant operation, billing, and diagnostics, but not every meter type suits every application. Here is a general orientation to the common options and their trade-offs.
Read article→
Water Treatment TechnologyIon Exchange vs RO for Demineralization: Choosing the Right Approach
Ion exchange and RO both reduce dissolved mineral content, but they work through different mechanisms with different trade-offs. Here is how to think about choosing between them for a demineralization requirement.
Read article→Water Treatment TechnologyWater Balance Calculations: The Starting Point for Any Treatment Plant Design
A water balance — tracking where every unit of water enters, is used, and leaves a facility — is a foundational step that should precede detailed treatment system design, not follow it. Here is why.
Read article→
RO & FiltrationTypes of RO Membrane Fouling Explained: Colloidal, Organic, Biological, Scale
RO membrane fouling is not a single phenomenon — different fouling mechanisms have different causes, different warning signs, and different appropriate responses. Here is how they differ.
Read article→
Bangladesh Water IssuesWater Treatment Considerations for Agricultural Irrigation in Bangladesh
Irrigation water quality is a distinct concern from drinking-water quality, with its own set of parameters that matter for crop health and soil condition over time. Here is a general orientation.
Read article→RO & FiltrationSand Filters vs Cartridge Filters: Which Makes Sense for Your Application
Sand media filters and cartridge filters both remove suspended particulate, but they suit different scales and operating patterns. Here is a practical comparison of when each makes more sense.
Read article→
ETPColor Removal from Textile Dyeing Effluent: Why It's Different from Standard ETP
Dye-bearing textile effluent presents a specific treatment challenge — visible color — that a standard ETP designed only for organic load and suspended solids does not automatically address. Here is a general orientation.
Read article→
Maintenance & ServiceSpare Parts Inventory Planning for Water Treatment Plants
Unplanned equipment failure without an available spare part on hand can turn a routine repair into an extended, costly plant outage. Here is a general orientation to spare parts inventory planning.
Read article→Water Treatment TechnologySite Selection for a Water Treatment Plant: What to Consider
Where a treatment plant is physically sited on a property affects cost, operability and long-term performance in ways that are easy to underweight against more immediately visible site-planning priorities. Here is a general orientation.
Read article→
Commercial Water TreatmentWater Treatment for Mosques and Madrasas in Bangladesh
Mosques and madrasas have distinctive water-use patterns tied to ablution (wudu) and general facility needs, with their own practical water-treatment planning considerations. Here is a general orientation.
Read article→
Water Treatment TechnologyActivated Alumina for Arsenic Removal: How It Works
Activated alumina is one of several specific technologies used for arsenic removal from groundwater in Bangladesh. Here is a general orientation to how it works and its practical considerations.
Read article→
Cost & Buying GuidePlanning a Water Treatment Plant for Future Capacity Expansion
Many facilities eventually outgrow their original water treatment capacity, and planning for that possibility upfront is considerably cheaper than retrofitting expansion later. Here is a general orientation.
Read article→
RO & FiltrationWater Softener vs Water Conditioner: Is There a Real Difference?
Water conditioners are sometimes marketed as an alternative to traditional ion-exchange softeners, without always clarifying what they actually do differently. Here is an honest look at the distinction.
Read article→Commercial Water TreatmentWater Treatment for Construction Sites and Labour Camps
Construction sites and associated labour accommodation have distinctive, often temporary water-supply and treatment needs, different from a permanent facility. Here is a general orientation.
Read article→Water Treatment TechnologyInstrumentation for Water Treatment Plants: What Gets Measured and Why
Instrumentation is what actually tells an operator whether a plant is performing as designed, rather than simply appearing to run. Here is a general orientation to what is commonly measured and why.
Read article→Maintenance & ServiceWhy Is My RO System's Output Dropping? A Troubleshooting Guide
A gradual decline in RO product water output is one of the more common issues households and facilities encounter, with several possible causes worth checking systematically rather than guessing.
Read article→Cost & Buying GuideCivil Works vs Mechanical Equipment: Where WTP Budgets Actually Go
Discussions about water treatment plant cost often focus heavily on equipment specification, while civil works can represent a substantial, sometimes underestimated share of the total budget. Here is a general orientation.
Read article→
Bangladesh Water IssuesGreywater Recycling: Basics for Bangladesh Properties
Greywater recycling is increasingly discussed for larger buildings and facilities in Bangladesh looking to reduce fresh-water demand. Here is a general orientation to what it involves and where it genuinely makes sense.
Read article→
Industrial Water TreatmentWater Treatment for Dairy Processing in Bangladesh
Dairy processing has specific water-quality requirements tied to both product safety and equipment protection, distinct from general food-industry water treatment. Here is a general orientation.
Read article→
Water Treatment TechnologyChoosing Pipe Material for Water Treatment Systems: PVC, CPVC, SS
Pipe material selection is sometimes treated as a minor specification detail, but the wrong choice for a specific application can cause real, costly problems. Here is what generally needs to be considered.
Read article→
Maintenance & ServiceNoise and Odour Control for Water Treatment Plants
Noise and odour are often treated as secondary nuisance concerns in treatment plant design, but they have real operational, regulatory and neighbour-relations consequences. Here is a general orientation.
Read article→Need help applying this information?
Request assessment