In this guide
This article explains the treatment objective, the design information that matters and the operating checks that help keep the system practical after installation.
Salt use follows hardness load
The amount of hardness removed between regenerations is the product of water volume and hardness concentration. Higher hardness or higher throughput consumes resin capacity faster, so regeneration frequency increases unless more resin capacity is provided.
Regeneration settings affect efficiency
Using more salt per regeneration can increase usable resin capacity up to a point, but it may reduce salt efficiency. Valve programming should be matched to resin volume, desired capacity and actual demand rather than left at arbitrary factory defaults.
Measure instead of guessing
Tracking meter volume, inlet hardness, outlet hardness and salt additions can reveal whether the unit is regenerating too often or allowing breakthrough. Brine-system problems can also increase salt use without improving treatment.
Need a treatment recommendation for your water?
Send the water source, intended use, approximate demand and any available test report. Waterwise Bangladesh can review the requirement and discuss an appropriate treatment approach.
